How to Remove the Back Seat in a Toyota Yaris
Removing the back seat in a Toyota Yaris is a straightforward DIY task that frees up valuable cargo space. You only need basic hand tools and about an hour to complete the job. This guide walks you through removing the cushion and backrest safely without damaging your interior.
If you need more room inside your Toyota Yaris, learning how to remove the back seat is one of the best DIY tricks you can try. Whether you are moving furniture, heading out for a weekend camping trip, or just want a cleaner trunk area, taking out the rear seat gives you a flat, open space that is much easier to use. The good news is that you do not need to be a professional mechanic to get the job done.
Most Toyota Yaris models are built with simple bolt-down rear seats. That means a few common hand tools and a little patience are all you really need. In this guide, I will walk you through every step of how to remove the back seat in a Toyota Yaris, from prepping the cabin to reinstalling everything safely.
By the end of this article, you will know exactly which bolts to take out, how to handle the seat belt hardware, and how to put the seat back without any wobbles. Let’s get started so you can enjoy all that extra space.
Key Takeaways
- Basic tools only: You can remove the back seat in a Toyota Yaris using a socket set, trim tool, and screwdriver.
- Cushion comes first: Always remove the seat cushion before attempting to take out the backrest.
- Watch for hidden bolts: Some fasteners are hidden under plastic covers or carpet flaps.
- Disconnect the battery: If your Yaris has seat belt pretensioners, disconnect the battery for safety.
- Label everything: Keep bolts and clips organized so reinstallation is quick and easy.
- Test for stability: After reinstalling, shake the seat to make sure it is secure before driving.
📑 Table of Contents
- Why Remove the Back Seat in a Toyota Yaris?
- Tools and Materials You’ll Need
- Preparing Your Toyota Yaris for Seat Removal
- How to Remove the Back Seat Cushion in a Toyota Yaris
- How to Remove the Back Seat Backrest in a Toyota Yaris
- Reinstalling the Back Seat and Final Safety Checks
- Common Mistakes to Avoid When You Remove the Back Seat Toyota Yaris Owners Should Know
- Conclusion
Why Remove the Back Seat in a Toyota Yaris?
There are plenty of good reasons to remove the back seat in a Toyota Yaris. The compact size of the Yaris makes every inch count, and the rear seat often takes up more room than you realize. When it is gone, the cargo area opens up completely.
More Cargo Space for Big Projects
If you are hauling a large box, a piece of furniture, or gear for a weekend trip, the back seat gets in the way. Removing it turns the rear cabin into a flat loading zone. You can slide long items straight through from the trunk to the front, which is impossible with the seat installed. Many owners choose to remove the back seat in a Toyota Yaris before moving day so they can fit more in one trip.
Better Access for Cleaning and Repairs
Crumbs, dirt, and pet hair love to hide under the rear seat cushion. When you remove the back seat in a Toyota Yaris, you can vacuum every corner and shampoo the carpet properly. It also makes it easier to inspect the floor for rust or leaks. A clean interior not only looks better but can also help maintain your car’s value over time.
Creating a Camping or Sleeping Area
Some Yaris owners take out the back seat to build a custom sleeping platform for road trips. With the seat gone, you have a level surface where you can lay down a mattress or foam pad. It is a popular modification for people who love to sleep in their car. If you plan to camp often, removing the back seat in a Toyota Yaris gives you a ready-made bed platform without building anything complicated.
Improving Access for Audio Installation
If you are upgrading your stereo, removing the rear seat can make it easier to run speaker wires or install a subwoofer. Some owners take out the seat to reach the rear deck or the area under the carpet. If you are removing the seat to run wires for new audio gear, you might also want to look at our guide on the top 7 best 6 5 inch car speakers for a stock car stereo. It pairs well with a clean interior project.
For other Toyota maintenance ideas, feel free to explore our Toyota category for more brand-specific articles.
Tools and Materials You’ll Need
Before you start, gather everything so you do not have to stop in the middle of the job. You do not need fancy equipment, but having the right tools makes the process smoother.
Basic Hand Tools
- Socket wrench set (10mm and 12mm sockets are common on most Yaris models)
- Ratchet with extensions to reach deep bolts
- Flathead screwdriver for prying plastic covers
- Trim removal tool or plastic pry bar to avoid scratching panels
- Phillips head screwdriver for any screws
Safety Gear
- Work gloves to protect your hands from sharp metal edges
- Safety glasses in case a clip snaps or debris falls
- Knee pads if you plan to kneel on the floor for a long time
Optional Helpers
A magnetic tray or small container is great for holding bolts and clips. You might also want a flashlight to see under the seat and a friend to help lift the heavy backrest. Having a second person makes it much easier to maneuver the backrest out through the door.
Preparing Your Toyota Yaris for Seat Removal
Preparation is half the battle. Taking a few minutes to get the cabin ready will save you frustration later.
Clear Out the Interior
Remove all personal items from the back seat and the trunk. Take out floor mats, cup holders, and anything else that could get in your way. A clean workspace makes it easier to spot hidden fasteners and prevents you from losing small parts.
Move the Front Seats Forward
Slide the front seats as far forward as they will go. This gives you more legroom to work in the rear and prevents you from bumping into the front seatbacks while you remove the back seat in a Toyota Yaris. It also gives you a better angle to see the rear mounting bolts.
Disconnect the Battery (Optional but Smart)
Some Yaris models have seat belt pretensioners or airbag sensors near the rear seat anchors. If you are unsure, disconnect the negative terminal of the battery before you start. Wait about 15 minutes after disconnecting to let any stored power drain. This reduces the risk of accidentally triggering an airbag warning light.
How to Remove the Back Seat Cushion in a Toyota Yaris
The seat cushion is the bottom part where you sit. It usually comes out first because the backrest is attached to it or sits behind it.
Locate the Cushion Retainers
Look at the front edge of the seat cushion, near where it meets the floor. You will often see plastic covers or small bolts holding it down. In some Yaris models, the cushion is held by clips rather than bolts. Shine your flashlight underneath to spot every fastener.
Remove the Bolts or Clips
Use your socket wrench to take out any visible bolts. If you see plastic covers, pry them off gently with your trim removal tool. For clip-style cushions, pull up firmly on the front edge until the clips release. You might hear a popping sound, which is normal. If a bolt feels rusted, spray a little penetrating oil and wait a few minutes before trying again.
Lift Out the Cushion
Once the fasteners are free, lift the cushion straight up and out of the car. Set it aside in a safe place where it will not get scratched. If it feels stuck, double-check for any remaining bolts underneath. Do not force it, or you might tear the upholstery.
How to Remove the Back Seat Backrest in a Toyota Yaris
With the cushion out, you can now tackle the backrest. This is the upright part that supports your back. It is heavier than the cushion, so take your time.
Remove the Plastic Trim Covers
Look at the base of the backrest where it meets the floor. There are usually plastic covers hiding the mounting bolts. Pop these off with your screwdriver or trim tool. Work slowly so you do not crack the plastic.
Unscrew the Backrest Bolts
Under the covers, you will find bolts securing the backrest to the car frame. Use your socket wrench to remove them. Keep the bolts in your magnetic tray so they do not roll away. Some Yaris models have two bolts on each side, while others have a single central bolt.
Disconnect the Seat Belt (If Needed)
In some Toyota Yaris models, the rear seat belt is attached to the backrest. If you see a bolt connecting the seat belt buckle or retractor to the seat, remove it carefully. You may need to move the seat belt out of the way to free the backrest. If your car has seat belt pretensioners, be extra cautious and consider disconnecting the battery first.
Lift Out the Backrest
Tilt the backrest slightly forward and lift it out through the rear door or trunk opening. It can be awkward because of the angle, so having a helper is useful. Once it is out, place it next to the cushion. If you are removing the back seat in a Toyota Yaris for the first time, this is usually the heaviest part of the job.
Reinstalling the Back Seat and Final Safety Checks
Putting the seat back is basically the removal process in reverse. However, a few extra checks will ensure everything is safe for the road.
Reverse the Removal Steps
Set the backrest back into position first, then align the bolt holes. Reinstall the bolts and tighten them by hand before using the wrench. Next, place the cushion back on the floor and secure it with its bolts or clips. Make sure all plastic covers snap back into place.
Torque the Bolts Properly
Do not over-tighten the bolts, but make sure they are snug. Loose seat bolts can be dangerous in a sudden stop. If you have a torque wrench, check your owner’s manual for the recommended setting. Even without a torque wrench, a firm snug with a ratchet is usually enough.
Test the Seat Before Driving
Push and pull on the reinstalled seat to make sure it does not move. Buckle the seat belt and give it a firm tug. If everything feels solid, you are ready to drive. If you notice any wobble, recheck the bolts before taking the car on the highway.
If you plan to keep the seat in for a while, you might want to protect it with quality seat covers to keep the upholstery looking fresh.
Common Mistakes to Avoid When You Remove the Back Seat Toyota Yaris Owners Should Know
Forgetting Hidden Fasteners
One of the most common mistakes is assuming all bolts are visible. Always check under carpet flaps and plastic trim for hidden screws. Missing one can make the seat feel stuck and lead to frustration.
Losing Small Clips
Plastic clips break easily if you pry too hard. Work slowly and use the right tool. Keep all clips in a small container so you do not lose them. Replacement clips can be hard to find for older Yaris models.
Over-tightening Bolts
It is tempting to crank down on every bolt, but over-tightening can strip the threads or crack the plastic mounts. Tighten until firm, then stop. If you strip a bolt hole, you may need a larger bolt or a thread repair kit.
Ignoring the Seat Belt
Some people forget to reconnect the seat belt properly after reinstalling the backrest. Always make sure the buckle clicks and the belt retracts smoothly. A loose seat belt is a safety hazard.
Conclusion
Removing the back seat in a Toyota Yaris is a simple project that pays off with extra space and easier cleaning. With basic tools, a clear plan, and a little patience, you can do it in an afternoon. Just remember to keep your hardware organized, check for hidden fasteners, and test the seat before you hit the road.
Whether you are making room for camping gear or just want a cleaner interior, you now have the steps to do it safely. Enjoy the extra room in your Yaris!
Frequently Asked Questions
How long does it take to remove the back seat in a Toyota Yaris?
Most people can finish the job in about 30 to 60 minutes. If you are doing it for the first time, give yourself an extra half hour to locate all the bolts.
Do I need special tools to remove the back seat in a Toyota Yaris?
No, you only need basic hand tools like a socket set, screwdrivers, and a trim removal tool. No specialty automotive tools are required.
Can I remove the back seat in a Toyota Yaris by myself?
Yes, though having a helper makes lifting the backrest easier. If you work alone, take your time and set the seat down carefully to avoid damage.
Will removing the back seat affect my Toyota Yaris safety?
As long as you reinstall the seat securely and reconnect the seat belt, safety is not compromised. Never drive with the seat partially installed or loose bolts.
Can I fold the back seat instead of removing it in a Toyota Yaris?
Many Yaris models have folding rear seats, but they do not create a fully flat surface. Removing the seat entirely gives you more usable cargo space.
Where do I store the bolts when I remove the back seat in a Toyota Yaris?
Use a magnetic tray, small bowl, or zip-top bag to keep bolts and clips together. Label them if you are removing multiple seats or working over several days.
